450 input shaft

Anonymous-0 · Feb 19, 2010

How hard is it to change the input shaft going to the transmission on a 450. Isnt it a splined shaft with a splined tube around it.

D Slater · Feb 19, 2010

If it has a t/a and IPTO and is already split at rear of engine. Remove release bearing and fork, cross shaft and the 3 bolts in the snout release bearing goes on. Put a slide hammer or a long bolt with 3/8 coarse threads and something heavy to slide on it in the hole of front clutch shaft. It and the pto drive gear and shaft will come out togeather. some come out on the first jar and some takes several more.

450 input shaft

Anonymous-0

Well-known Member

D Slater

Well-known Member

Similar threads