(800) 853-2651
SHOP NOW

IH 424 (gas) wiring

M

Mike tn

Member
Folks, i sure could use some help reading the wiring diagram. Let me explain a bit - i have macular degeneration and can read screes with large font b ut not the small print..

A couple of years ago the generator was replaced with a 3 wire delco alternator and the oil and alt lights worked properly. Later on i painted it removing the voltage regulator and wirimg when i painted it. Since then neither light works.

Can someone tell me what wures go to the idiot lights. Under the dash there is a pink, red and black wires going to them. What do i run to these wires?.

Any assistance appreciated as i need to sell the tractor.
 
I will try. The voltage regulator is in the alternator, so if you removed "a" voltage regulator, I will assume it is not the voltage regulator.
The alt light should have one terminal connected to the ignition switch terminal that goes to the coil.
The other Alt light connection goes to the #1 terminal on the edge of the alt.
The oil pressure light hooks to the oil pressure switch on the block, and to the same ignition terminal as the alt light. The #2 terminal on the Alt hooks to the big output stud on the Alt. Jim
 
janicholson, thanks for the reply. After re-reading my original request for hekp i realize how vague it was.

The 424 runs very well - it's those idiot lights that don't work that are not working. What would help fix them is the connections that go to the red.pink and black wires on the light "module".
 
My answer was vague as well. I do not know which wire is which on the light module. I do know that the alt light must be placed in series with the #1 terminal and key power.
I do know that the oil pressure switch on the block is open with pressure (shutting off the light) Sorry I cannot assist with color code. Jim
 
You must log in or register to reply here.

Similar threads

D
Trying to understand cab/lights wiring connection to light switch on farmall 826 diesel
Replies
2
Views
274
used red MN
U
JJay48
12v and Wiring Questions
2
Replies
21
Views
626
JJay48
JJay48
D
300U...leftover wiring????
Replies
2
Views
228
BarnyardEngineering
BarnyardEngineering
J
1948 RTU Wiring
Replies
4
Views
525
MMDEL
M
S
MF 35 wiring diagrams
Replies
13
Views
2K
Eazycheeze
E
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top