Anonymous-0
Well-known Member
No that she runs great on 6 volts what do i need to do to switch the Ignition to 12 volts?
- Thread starter Anonymous-0
- Start date
Janicholson
Well-known Member
There is no reason to do so if it runs great. If you need to, you will need to decide if you want to stay with a generator, or use an alternator.
A 12v generator, VR, battery, coil (or ballast resistor, and light bulbs are needed. It will use original wiring all the way (except if you keep the coil and use a ballast resistor.
If going with an alternator, I would use a Hitachi from a mid 80s Nissan PU. Wired as shown in the attached diagrams from Bob M.
The Hitachi alternator terminals are "I" equals the Delco 10SI # 1 terminal. The S terminal equals the Delco #2 terminal. Jim
Bob Ms Superlative Wiring diagrams
A 12v generator, VR, battery, coil (or ballast resistor, and light bulbs are needed. It will use original wiring all the way (except if you keep the coil and use a ballast resistor.
If going with an alternator, I would use a Hitachi from a mid 80s Nissan PU. Wired as shown in the attached diagrams from Bob M.
The Hitachi alternator terminals are "I" equals the Delco 10SI # 1 terminal. The S terminal equals the Delco #2 terminal. Jim
Bob Ms Superlative Wiring diagrams
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy