M+W options

Dieselcowboy · Jan 23, 2011

Curious to see how many M+W options everyone can think of that where available for the H and M farmalls. I have come up with about 12 M+W parts on my "M" so far. Charlynn products can count in this conversation too. Is any information or articals out there about these products?

glennster · Jan 23, 2011

the 9 speed, high compression pistons, governor, friction throttle.

scotc · Jan 23, 2011

hand clutch, live hyd pump

Anonymous-0 · Jan 23, 2011

1 Hand clutch
2 live pto kit
3 add power engine kit
4 live hydraulic pump
5 hubs for rear axle
6 air cleaner
7 turbo kit

Are the few that come to mind.

scotc · Jan 23, 2011

I've never actually seen one but I heard they made a stroker crank, too.

scotc · Jan 23, 2011

dual hubs, too, I think

D Slater · Jan 23, 2011

For a M, Crankshaft, piston sleeve sets, high lift rocker arms, governor, air cleaner, throttle, Gear drive for starters, Hand clutch, 9 speed, hydraulic systems, supper snout grill, hubs. all I can think of at the moment, missing something.

randy hall · Jan 23, 2011

hydraulic pump disconnect and easy to reach pto shift lever and mounting brackets to put a fast hittch on an m.

GeneMO · Jan 23, 2011

Didn't they make a little extension for the clutch that made depressing the peddle easier?

Gene

Dieselcowboy · Jan 23, 2011

Here is what I know is on my "M", without pulling the oil pan and checking the crank. Charlynn PS.
Governor
Pistons
super snoot
live hyds
2 way hyd valve
clutch extention
throttle
PTO handle
Belt pulley handle
9 bolt dual hubs
live clutch
front wheel wedge ( changes the angle for easyer steering) If I didn't put a wide front on.
Still looking for all the stuff I am missing....

How about any informational places?

Farmallhal · Jan 23, 2011

How about that dip stick that screwed onto the oil pan where a petcock was removed for checking the engine oil level. I see them ocassionally on Ebay, Hal.

Anonymous-0 · Jan 23, 2011

When I attended Milford Tech in the 60's, 4 of us boys overhauled a Super M and installed a M and W crankshaft. I am thinking it was a 6 inch stroker and put in on a dyno, it pulled 70 hp with M and W fire creator pistons. That was alot of fun.

randy hall · Jan 23, 2011

the m+w crank was 5 3/4" stroke and their pistons were called 'turbo-domes', ih improved pistons were fire-craters.

Anonymous-0 · Jan 23, 2011

Describe the super snout please.

Dieselcowboy · Jan 23, 2011

The super snoot is a replacement grill that has no hole where the normal grills are but a square screen that is attached to the top of the grill and sucks cleaner air in there. Made for mounted corn pickers.

Anonymous-0 · Jan 24, 2011

Didn't they have a gear reduction starter too?

BillyinStoughton · Jan 24, 2011

M&W Super Snoot!

<a href="http://s85.photobucket.com/albums/k58/BillyinStoughton/?action=view&current=201.jpg" target="_blank">

</a>

Dieselcowboy · Jan 24, 2011

I bet those corn picker contraptions are a blast to climb into !

M+W options

Dieselcowboy

Member

glennster

Well-known Member

scotc

Well-known Member

Anonymous-0

Well-known Member

scotc

Well-known Member

scotc

Well-known Member

D Slater

Well-known Member

randy hall

Member

GeneMO

Well-known Member

Dieselcowboy

Member

Farmallhal

Well-known Member

Anonymous-0

Well-known Member

randy hall

Member

Anonymous-0

Well-known Member

Dieselcowboy

Member

Anonymous-0

Well-known Member

BillyinStoughton

Member

Dieselcowboy

Member

Similar threads