super b belly pump drive seal

ajdeereman · Dec 16, 2011

So the coupler on the front of the transmission that drives the pump has to come off to replace the seal, I take it that it threaded on, is it right hand thread and what is it torqued to when reinstalling.

Zachary Hoyt · Dec 16, 2011

I assume you hit the wrong key and have a Super H. The countershaft nut is right hand threaded and it will tighten itself if the pump driveshaft is installed so that there is a load on it. To get it off search the archives for 'countershaft nut and you'll find the instructions.
Zach

ajdeereman · Dec 16, 2011

Ok but what is it torqued to because i do not have a belly pump that is going back in.

David G · Dec 16, 2011

Put the tractor in gear and tighten it up good with a square bar. I would guess 50 lb ft or so.

Bob M · Dec 16, 2011

If not installing the belly pump leave the coupler off. Or simply screw the coupler on finger tight (makes it much easier to remove next time!)

super b belly pump drive seal

ajdeereman

Member

Zachary Hoyt

Well-known Member

ajdeereman

Member

David G

Well-known Member

Bob M

Well-known Member

Similar threads