Anonymous-0
Well-known Member
I have a 560 diesel that some took out the t/a and I want to put a t/a back in so what do I need to do I know I need all the levers and linkages other then that what do I need
- Thread starter Anonymous-0
- Start date
Janicholson
Well-known Member
caseih.com parts and service go to search for parts link under the find parts banner. Put in Farmall. Select 560, go to chassis. Select Torque Amplifier.
If the TA was actually removed, there will be a delete drive shaft in its place. If it was just a case of removing linkage, there will be a TA in the powertrain. You will need those internal parts as described in the picture. Jim
If the TA was actually removed, there will be a delete drive shaft in its place. If it was just a case of removing linkage, there will be a TA in the powertrain. You will need those internal parts as described in the picture. Jim
Kevin Meier
Member
You will need a 363499 ta and a ta flyeheel and pressure plate. If it was just replaced with a ta elimination kit it should be an easy fix.
You gotta tear into it and find out what was actually done.
They might've simply removed the lever.
They may have gone in and welded up the spider gears in the TA.
They may have torn it down and put in a TA eliminator kit.
Depending on what was actually done, you will need different parts. Since we can't see the tractor we can't tell you what exactly you need.
They might've simply removed the lever.
They may have gone in and welded up the spider gears in the TA.
They may have torn it down and put in a TA eliminator kit.
Depending on what was actually done, you will need different parts. Since we can't see the tractor we can't tell you what exactly you need.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy