heavyhaulertoo
Member
We have a 756 that shifts down around the end when you slow the motor down. Does it have two hyd pumps like the 4&560's? Thank's for the help.
- Thread starter heavyhaulertoo
- Start date
Janicholson
Well-known Member
There are two pumps.
"Shifting down around the end" needs clarification!
are you saying the tractor slows like it downshifted into a lower gear when you idle it down? Jim
"Shifting down around the end" needs clarification!
are you saying the tractor slows like it downshifted into a lower gear when you idle it down? Jim
heavyhaulertoo
Member
It drop's into ta around the end. Thank's for comeback!!
Janicholson
Well-known Member
The Direct clutch is hydraulically driven using Oil pressure from the MCV pump. This pump can become worn, the filter can become plugged, or it can have an air leak into it from bad hardened Oring in the intake side of the pump, or the system can have pressure issues with the MCV valve, or other MCV system components. I would state that the way it is will destroy the TA and possible other components if allowed to stay broken.
Over filling the Hydraulic system by 5 gallons cures many with a Oring leak. If this makes no difference, further analysis with gauges and adapters and the manual for hydraulic control systems is needed. Jim
Over filling the Hydraulic system by 5 gallons cures many with a Oring leak. If this makes no difference, further analysis with gauges and adapters and the manual for hydraulic control systems is needed. Jim
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy