560's

Anonymous-0 · May 17, 2012

Are the transmission and rear ends the same in a farmall 560 as a international 560?

Thanks,Bob

Wardner · May 17, 2012

tires
rims
wheels
axles
axle housings
rear frame lid
seat
drawbar
fenders
ring and pinion ratio
steering
hydraulic levers
and probably a gear or two in the transmission

You would have gotten a quicker and more complete answer by simply going to the CaseIH on-line parts book. The parts above are all located behind the joint between the center section and rear frame. There are more differences in the front half.

Anonymous-0 · May 18, 2012

I am wondering if gears in rearend and transmission were same,got a international 560 with trans problems and was going to try to take them out of a farmall before it goes to junkyard. I know the bolt on stuff is differant.

Thanks
Bob

J.J. from Afton · May 18, 2012

The ring and pinion ratios are different between the rowcrop and the standard to make up for different wheel sizes, I wanna say it is one or two teeth more on the ring in the standard to make up for smaller rear wheels. You would have to check online to see about the 1st through 5th 4th gears as I would suspect those differ as well. I had to use the ring and pinion out of a rowcrop to replace the ones in my 560 standard so it goes a little slower but no huge difference.

mkirsch · May 18, 2012

So the Farmall will drive a little faster with the Wheatland's ring and pinion.

ejr-IA. · May 18, 2012

farmall ratio 15 to49,international 16 to 49 farmall is the slower one.

ejr-IA. · May 18, 2012

The International has the faster ring and pinion

Dalet · May 19, 2012

Okay I am an ignorant person, I grew up with another color. What is the actual difference of a Farmall and an International. Any number or letter. Is a rowcrop designation?

560's

Anonymous-0

Well-known Member

Wardner

Well-known Member

Anonymous-0

Well-known Member

J.J. from Afton

Member

mkirsch

Well-known Member

ejr-IA.

Member

ejr-IA.

Member

Dalet

Member

Similar threads