rear tire psi

Anonymous-0 · Jul 28, 2012

Can anyone tell me the proper psi for ARMSTRONG 15.5-38 nylon tires on 14 inch rims for general field work,also heavy field work.
They seem softer than the GOODYEAR.

uncle henry · Jul 28, 2012

i run 12psi in mine with 600lbs of weight on each wheel

rustred · Jul 28, 2012

anywhere from 12-16 lbs. i look at mine on a hard surface or floor and adjust pressure so you have a good footprint with the lugs.

rhtx55 · Jul 29, 2012

Oh my god...someone has stolen your muffler !!!
There went the neighborhood !!!

uncle henry · Jul 29, 2012

can't get it under the shed without taking in off if
somebody every did i hope they can run faster than
00 buckshot

Owen Aaland · Jul 30, 2012

(quoted from post at 00:41:24 07/29/12) anywhere from 12-16 lbs. i look at mine on a hard surface or floor and adjust pressure so you have a good footprint with the lugs.

About 1/4 inch gap between the hard surface and the outer end of a tread bar when located directly below the axle is about right for most conditions.

rhtx55 · Jul 30, 2012

(quoted from post at 14:02:59 07/29/12) can't get it under the shed without taking in off if
somebody every did i hope they can run faster than
00 buckshot

With a tasty bit of rock salt thrown in...+1

rear tire psi

Anonymous-0

Well-known Member

uncle henry

Member

rustred

Well-known Member

rhtx55

Member

uncle henry

Member

Owen Aaland

Well-known Member

rhtx55

Member

Similar threads