2 Bottom Plow Value?

Bryce Frazier

Well-known Member
I have a Ferguson 2 bottom plow, the data plate calls it a "2-16C-AO-28".

Attached is a picture of it, but I have since completely cleaned it, primered, and painted Ferguson Grey (and it is a nice paint job).

Has the correct coulters, and even the little chains that hold them in place. The ONLY thing wrong with the plow is that someone has welded / added onto the shares, but they did a really nice clean job of it!

What do you guys think it is worth? I restored it to use / show behind my TO-30, but around here, 2-16's is just too big for the tractor, and I never tried using it. It has been sitting in my barn taking up space for almost 3 years, and I think it is time for it to hit the road!

Anyone interested?? Thanks! Bryce
mvphoto16506.jpg
 
I purchased TWO FERGUSON 2 bottom Plows in 2017......

Condition looks like your plow ( unrestored) picture.....

$200.00 / Plow.....

Going price for North Western Alberta Canada....

Bob....
a267825.jpg

a267826.jpg
 
Bryce, where are you located? How many bolts hold the share or point on, 3 or 4? Do you have the jointers for that? What is that chain on the ground? Thank you.
 
My area $350-- sometimes depends on who wants it more or less and how bad someone wants to sell. I've seen them advertised $450. Not a lot of 16's in my area.
 
I'm in the northern tip of Idaho. I have no idea how many bolts hold the share on, but I will check! What are Jointers?

And the chain is just what I used to unload it at the time.
 
The actual name is jointers many people call them scrapers. On the disc plow they are called scrapers. They keep the coulters cleaned off.
 
Bryce I will take you up on the delivering. It's not to far between Idaho and Michigan. Just a nice little week end jaunt.
 
Not too many of those around,
I have a TO35 that came New with 3-12? plows, they do a great job if there is little trash on the field,
But tend to clog up if there is much trash, corn stalks, heavy weeds grass,

I looked for 2-16?s but never found a set,

I would try them before I just sold them an bought a 12? plow,

I finally bought a set of MF disc plows, they do a good job and do not stop up very much,
Some day I may find a 2-16? Plow in my community, might buy a 3-16 Plow and take the center plow off,
Again at least try them before you sell,
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top