(800) 853-2651
SHOP NOW

Case 400 with 504

C

crl800

Member
I know people have put 504 engine in 400 chassis, just wondering if someone would share the clutch flywheel combo that works. It will be a stock engine for now, not extreme on power. Thank you in advance for any help. I'm open to text or phone calls if it's to much to type out.
 
The 12 '' clutch will take around 120 HP with heavy springs and a 6 pad disc
A 14'' clutch from a 970 8 speed will take a lot more
I think that if you do some grinding in the clutch housing a 15'' will fit also
Just be sure and keep you RPM's under 2800 to prevent major damage and injury
 
Roger, I have a complete 1370. Not familiar with the clutch that it has. Do you know if I could use that one with some grinding? I really appreciate your help. Carl.
 
I am the farthest thing from a Case expert. But I don't think a 1370 has a clutch like that. I think it is just a hyd valve. They won't stop unless they are in low. I would measure the imput shaft and count the splines. On your 400. It may be the same as a 4x4 pickup. I would get a flywheel made that fit. Then you can use a pressure plate from a Dodge or Ford. You might want to turn it hard sometime. Just a few thoughts. Vic
 
On my D17 Allis I turned that down to 180 size. For the ring gear so a 180 starter would work. Then drilled it for a Ford clutch. Then balanced everything.
 
You must log in or register to reply here.

Similar threads

D
Case 1190 hydraulics
Replies
6
Views
467
DennisGul
D
R
Fltwheel for IH 504
Replies
7
Views
1K
Janicholson
Janicholson
G
Help with my 1958 J.I. Case 420B Industrial
Replies
17
Views
662
Joe (Wa)
J
J
Case 1737 rebuild
Replies
6
Views
1K
used red MN
U
C
Basic Tuning of Carbureted Performance Engines
Replies
2
Views
822
CFS Carbs
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top