V465d wisconsin

teddy52food · Dec 18, 2015

Are these engines noted for using oil? Should there be valve seals on the intakes?

jr1983 · Dec 18, 2015

Yes and yes pull the oil fill cap and put it under a load. Mine has no blow by even at full throttle no load. Put a load on it and it smokes more there than the exhaust.

JOCCO · Dec 19, 2015

Those are overhead valve, in the flat head older ones the valve guides were always messing up. You could have a valve guide issue or ring issue.

teddy52food · Dec 19, 2015

I just got done rebuilding it. Rebore to .010 with new pistons & rings, new std bearings. There were no seals on the valves so I didn't put any on as there weren't any in the gasket set. Pulled a head & the intake valve is all full of oil even with the guide tight. I will add seals & try again. It had a mouse nest in it & one piston had all the compression rings broken. Bore was hurt so I did them all. It had a lot of blow-by before but not now. Sure smokes out the exhaust though.

V465d wisconsin

teddy52food

Well-known Member

jr1983

Member

JOCCO

Well-known Member

teddy52food

Well-known Member

Similar threads