Hello, new here sorry if I posted in the wrong place. Could not find a clear answer to my situation so I shall ask. I have a lot of mechanical experience but am no hydraulic expert. I have an 87 1710 with factory 770A loader and no draft control. I am mounting an old Fisher power angle snowplow in the bucket with the angle pistons plumbed into the matching Fisher valve body. I need to know if I can simply run the 3 point hitch lever in the top notch and plumb the pressure and return lines from the Fisher valve body into the 2 ports to the right and under the seat? Some posts I have read have hinted of these being used as auxiliary feeds but unsure.Any help would be greatly appreciated. Thanks.
- Thread starter rebelyank
- Start date
kcm.MN
Well-known Member
- Location
- NW Minnesota
Doesn't the Fisher plow use a hydraulic power pak to power the plow?? If so, then all you need is to mount the plow frame to the loader bucket, hook up the electronics to your tractor, then use the existing joystick (or ???) that came with the Fisher plow.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy