Head.

Kenfarmall · Jul 20, 2019

Can somebody tell me what the torque setting is for a Farmall H head and in what order do I torque the head nuts Thank you

old · Jul 20, 2019

I-T manual say 70ft/lbs

Janicholson · Jul 20, 2019

Start in the middle with an X shape and work to the ends. Use 3 stages to the specification. 30, 50, 70. Jim

rustyfarmall · Jul 20, 2019

I'm not sure that the IT manual is correct. I think 70 ft lbs is not enough. Seems like I torqued mine to 90 ft lbs..

old · Jul 20, 2019

It has it at 70 for the H and 110 for the M

D Slater · Jul 20, 2019

Start with one and follow the numbers at nut locations if you can make them out as you go through different tightening levels. For some reason IH went from 70 foot pounds to 73 in this later publication.

D Slater · Jul 20, 2019

Can't get the picture to come up for some reason.

Gary Mitchell · Jul 20, 2019

,,,,, and twice on the 70. gm

D Slater · Jul 20, 2019

Try agiain

Kenfarmall · Jul 21, 2019

Thank all you guys for the help

rustyfarmall · Jul 21, 2019

(quoted from post at 11:35:50 07/20/19) It has it at 70 for the H and 110 for the M

You're correct.

Head.

Kenfarmall

Member

old

Well-known Member

Janicholson

Well-known Member

rustyfarmall

Well-known Member

old

Well-known Member

D Slater

Well-known Member

D Slater

Well-known Member

Gary Mitchell

Well-known Member

D Slater

Well-known Member

Kenfarmall

Member

rustyfarmall

Well-known Member

Similar threads