Fawteen
Well-known Member
- Location
- Downeast Maine
I see I should have offset the hitch, but we'll just call that "transport mode".
Need to add a PTO shaft too, easy enough.
Need to add a PTO shaft too, easy enough.
- Thread starter Fawteen
- Start date
OP
OP
Fawteen
Well-known Member
- Location
- Downeast Maine
A little dab of black paint on the knuckles isn't a bad idea!
Michael Soldan
Well-known Member
Put an engine on the combine ! Our neighbour had an AC combine with its own engine to drive it. He used a B Allis to pull it. The engine on the combine was the same engine as in a B tractor. Your model is awesome you have a real talent , I admire your work. !
OP
OP
Fawteen
Well-known Member
- Location
- Downeast Maine
Actual build time, perhaps 4-6 hours.
A lot of cut this out and glue it together, wait for it to cure, cut the next subassembly out, wait for it to cure, etc, etc.
That amounts to 20 minutes here and there over a period of about 10 days.
A lot of cut this out and glue it together, wait for it to cure, cut the next subassembly out, wait for it to cure, etc, etc.
That amounts to 20 minutes here and there over a period of about 10 days.
OP
OP
Fawteen
Well-known Member
- Location
- Downeast Maine
"8^)
I'd build another one, not that hard if you take it one subassembly at a time. Few things I'd do different from the prototype too.
Sorry, cash and carry only...
I'd build another one, not that hard if you take it one subassembly at a time. Few things I'd do different from the prototype too.
Sorry, cash and carry only...
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy