Question for billonthefarm

3020 JD 15 · Mar 17, 2009

How hard was it to take out the steering valve on your 3010. I got to on my 3020. How did you take off the dash. You leave the gauges on the tractor or with the panel. How hard were the 4 bolts holding it on was it to break loose. Thanks.

billonthefarm · Mar 17, 2009

I left the gauges with the tractor and that helps some. The bolts werent that hard to break loose. I think you have to stick a long extension and socket in from the right side to get to one. Some of the lines are unhandy to get loose. Going back together is a bigger pain. You will probably want some help to hold it in position while you get the bolts started. Hooking the lines back up was the worst. Hard to get everything just right and its pretty tight but you will be fine, just take your time.
bill

3020 JD 15 · Mar 17, 2009

Thanks for the info. I do dread putting it back on but hay season aint long and I need it for baling. Take Care

billonthefarm · Mar 18, 2009

On the 3010 it was well worth the effort. Hope it works out good for you.
bill

3020 JD 15 · Mar 18, 2009

Just one more question before I start on it. Did you lift it out with help from somebody or some kind of overhead lift. Thanks again.

Question for billonthefarm

3020 JD 15

Member

billonthefarm

Member

3020 JD 15

Member

billonthefarm

Member

3020 JD 15

Member

Similar threads