David Kemp
New User
This message is a reply to an archived post by Tx Jim on October 22, 2007 at 03:46:58.
The original subject was "Re: JD 1120 steering has a lot of play".
I have the same problem. In my case the bellcrank bushings or bearings have long since gone. How do I replace them? Do I need to drop the whole axle assembly? There is a large nut and split pin that hold the part in place and there appears to be no room to lift the crank once the nut is removed.
The original subject was "Re: JD 1120 steering has a lot of play".
I have the same problem. In my case the bellcrank bushings or bearings have long since gone. How do I replace them? Do I need to drop the whole axle assembly? There is a large nut and split pin that hold the part in place and there appears to be no room to lift the crank once the nut is removed.