Width of 150 horse tractor with duals.

Chances R · Jun 19, 2009

I know this is a hard question to answer but about how wide would a 150 horse tractor be with about 20" wide rubber.
If I was to guess 12'
I am placing a jack on the side of a tounge of a land leveler and want to attempt to place it where a tire wont get in to it.

Rick Kr · Jun 19, 2009

My AC7000 was 12'8" wide.

18.4x38 clamp on duals. Inside rear wheel weights added maybe 6" per side. W/O the weights I think it would measure around 11'6" or so.

Hope this helps.
Rick

Chances R · Jun 19, 2009

I thank you very much

Brokenwrench · Jun 19, 2009

I have 18.4/38s on my 4430 with the duels set wide, it s just shy of thirteen feet.

dwrk · Jun 19, 2009

Have 20.8R38 clampons on a White 6124, it's well over 13' with the inside wheels set in all the way. Could probably gain another 14-15" by setting them out.

<a href="http://s100.photobucket.com/albums/m34/dalek2/?action=view&current=whitetractor.jpg" target="_blank">

whitetractor.jpg" border="0" alt="Photobucket

</a>

Tx Jim · Jun 20, 2009

Chances R
Why not mount jack close to hitching point. Some implements store jacks on top of tongue or frame to avoid being hit by tires while turning. A JD 1635 plowing tandem is one example.

Width of 150 horse tractor with duals.

Chances R

Member

Rick Kr

Well-known Member

Chances R

Member

Brokenwrench

Member

dwrk

Member

Tx Jim

Well-known Member

Similar threads