Farmall & IHC Tractors Discussion Board |
Re: How to set the clutch and TA on 460
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Red Button on February 01, 2001 at 10:15:53 from (207.232.79.81):
In Reply to: How to set the clutch and TA on 460 posted by Mike on January 31, 2001 at 13:48:10:
There is a step by step way 1 pull Ta lever back and lock in TA 2 push foot peddle down till it stops with through out BRG at clutch fingers that is free peddle should have 3/4" between peddle and deck adjust link to get 3/4" 3 release TA Lever 4 hold foot peddle at the free travel and move TA lever back till it stops at it's free travel the pin in the short link should be tight if not adjust till pin is tight 5 with foot peddle back at deck and TA lever forward the pin in the long link on TA lever should be just lose. repet to double check 6 drive tractor to see how it works if it hangs in gear shorten short link between the 2 cross shafts 1/2 Round good lock
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|