Farmall & IHC Tractors Discussion Board |
Re: Stuck bolts
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on February 03, 2001 at 16:30:04 from (129.37.117.163):
In Reply to: Stuck bolts posted by Farmer dan on February 03, 2001 at 15:24:14:
Apply liberal amounts of penetrating oil such as liquid wrench. If you have the nut off the bolt, you should be almost there. After the penetrant has time to work, apply a hammer to the bolt to drive it out. It should come eventually. You may want to put a nut loosely on the bolt to keep the end of the bolt from mushrooming. Also to keep it from coming out suddenly and the weight falling. The problem here an with other rusted bolts is that when iron rusts, the volume increases many times over. This expansion can cause things to really get stuck tight.
Follow Ups:
Home
| Forums
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|