Farmall & IHC Tractors Discussion Board |
Re: Hard starting 966
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Lee K. on February 27, 2001 at 17:48:01 from (205.160.206.85):
In Reply to: Hard starting 966 posted by Joe on February 27, 2001 at 17:35:13:
It is very possible that it is in your injection pump. In the Model 100's that are on the '66 series there is an excess fueling device on them. When the tractor is started, the pump is automatically put on max fuel until it fires. Engine oil preasure pushes this excess fuel device out so the governer arm can pivot on it, and thus govern the engine. It is possible that this is stuck out. An easy way to ck this is to pull the top cover off of the pump. Under the cap, there is a skrew with a lock nut on it, with a flat piece of metal that goes toward the bottom of the pump. You should be able to take this flat plate that is on the backside of the locknut and skrew and pull it with your fingures with little effort.. If you can do this, it is alright. If it is already pushed out, this tells you that it is stuck, and will not give you the extra fuel when you start. Just remember to keep it clean if you pull that cover off.
Follow Ups:
Home
| Forums
Today's Featured Article -
Gatherin of the Orange - by Rick Nikolich. In July of 1998 I was talking to fellow Allis Chalmers collector Mike Schilling about the annual "Gathering of The Orange" AC show coming up in August of 1999. He got this wild idea that we should get a convoy of AC tractors and drive them from Charlotte, Michigan 105 miles to LaGrange, Indiana.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|