Farmall & IHC Tractors Discussion Board |
Re: Super A...Splitting Tractor
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave T on April 21, 2001 at 06:52:11 from (63.27.107.229):
In Reply to: Super A...Splitting Tractor posted by Tyler (MD) on April 21, 2001 at 05:09:48:
When I split my Super C, I cross blocked up the rear end, then used a cherry picker hoist to lift up the front end, and roll it away from the rear. This worked real well. I removed the pan so it wouldn't be dammaged. I have the early Super C with the graphite bearing. That was junk. Spendy replacing I might add. My pilot bearing was worn .150" and the clutch basically did what yours is doing. In removing the pilot bearing, I took a mini-grinder with a small burr and ground a groove thru the wall thickness of the bushing. This allowed the bearing to pull out with just my fingers. Good luck, it's not as bad as a guy first think it is....Dave
Follow Ups:
Home
| Forums
Today's Featured Article -
An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|