Farmall & IHC Tractors Discussion Board |
Re: Model A steering box
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by David A on May 16, 2001 at 05:39:02 from (12.26.113.4):
In Reply to: Model A steering box posted by Eric on May 15, 2001 at 20:22:44:
The first check is as Vern said, make sure the steering arm is bolted tight to the steering shaft at the bottom of the box. Make sure the play is not due to the tie rods. This box has two shafts, each supported by bearings. The steering column has a large ball bearing on the bottom end. It can be replaced by removing the steering wheel and the big plug in the front of the box and unscrewing the shaft out through the front. The other shaft is short and almost vertical and connects to the steering arm. It's bearings are harder to replace because I believe the box has to come out. Have a helper turn the wheel while you see what moves and let us know what you find out.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|