Farmall & IHC Tractors Discussion Board |
Re: splitting a 560, have a few questions
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Red Rider on June 25, 2001 at 21:07:56 from (63.44.140.196):
In Reply to: splitting a 560, have a few questions posted by matthew on June 25, 2001 at 19:18:50:
On a 400/450 there is a 1/4 inch thick adapter plate between the engine and clutch housing. The side rails bolt though this and into the clutch housing. Bolt your supports to the side rails, block the engine and then after you separate the clutch housing I slipped the bolts back through the 1/4 plate and the side rails. This supports the engine and you can remove the blocking under the engine. I put heavy duty piviting 6 inch wheels on my supports so I could roll the engine and front end around. Of coarse I did have a wide front to. If your supports are about 45 degrees of the frame rails I think it would still give you enough stabilization for a narrow front end. I think the 560 would split the same as a 450
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|