Farmall & IHC Tractors Discussion Board |
Re: Frustration with H electricals
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on June 28, 2001 at 14:36:03 from (66.66.72.246):
In Reply to: Frustration with H electricals posted by Bergen on June 28, 2001 at 13:14:20:
Bergen - Here's what I see may have happened: 1 - A wire broke somewhere in the wiring harness when you split the tractor. 2 - You fried the regulator when you attempted to polarize by connecting F and BAT at the regulator (should have connected BAT and GEN) If you have an ohmmeter, suggest disconnecting the wiring at the generator and regulator, then checking each wire end to end for continuity. If you find one that's open, repair/replace as necessary. Then put on a new regulator and see what you get. Good luck!
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|