Farmall & IHC Tractors Discussion Board |
Re: 1020
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob Kerr on July 15, 2001 at 21:36:11 from (152.163.205.72):
In Reply to: 1020 posted by overlandwagontim on July 15, 2001 at 06:04:55:
If you have the E4A mag you may want to see if the Impulse is tripping off too soon. If the engine isn't at a certain speed it may not have enough "spin" on the armature to make the spark without the impulse still on.Also did you rebuild your carb lately? The kits have the wrong setting measurement for the float.Set the float at the cut groove inside the fuel bowl wall.My 10-20 when it was set at the kit specs would slightly flood the engine.The float was just slightly too high.It would start and then die.It was sucking up all the liquid fuel in the bottom of the carb and manifold. It would take about a hundred pulls(seemed like anyway!) to get going again and then it would blow black smoke and die again.I thought my arm was going to fall off! I set the float to the groove in the fuel bowl and it has been purring like "a cream fed cat in front of a fireplace" ever since.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|