Farmall & IHC Tractors Discussion Board |
Re: Gas tank sealer?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on October 22, 2001 at 18:19:56 from (129.37.117.61):
In Reply to: Gas tank sealer? posted by Paul Shuler on October 22, 2001 at 10:39:33:
I used the Eastwood Sealer in the tank on my C with very good results. I did not have a problem with crud, but rather a leaking tank where the brackets are welded on. The sealer have been in there several months now and no problems. I bought the sealer "kit" from Eastwood which as I recall was 39.99 plus shipping. There is the sealer and I believe a cleaner and a conditioner. Also, be aware you have to go to a hardware or home supply store and buy a can of acetone and a jug of muratic acid. These are called for in the Eastwood instructions. Total cost by the time you get done is around $60. Also, be sure to wear heavy duty rubber gloves and eye safety equipment when using this stuff, especially the muratic acid. Disposal of the muratic is also a problem, I neutralized mine with lime. Be careful doing that and pour the acid slowly into a large bucket containing some lime and several gallons of water.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|