Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Hydraulic Ports On C??
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by pete on December 12, 2001 at 16:30:11 from (205.188.197.189):
In Reply to: Re: Re: Re: Hydraulic Ports On C?? posted by Haas on December 12, 2001 at 13:32:42:
Haas.....I recently bought a newly manufactured block (that goes between the manifold and Touch Control unit). The pressure side hole WAS drilled all the way throught the block. The supply hole was also drilled all the way throught the block and each of these holes had a seperate hole drilled into it from a right angle so that you could tap the new hydraulic lines into the new block. That arrangement seemed kind of strange to me cause it meant, like you were saying, that the new remote hydraulic valve that I wanted to add would be in paralell with the Touch Control unit and I wasn't sure that would work. So, I drilled/taped and capped the pressure hole at the inside of the manifold. I removed the pressure line cap on the outer side of the manifold and used that outer side manifold hole to supply pressure to the new valve. I then connected the new valve's return line to the right angle hole in the new block at what WAS the pressure hole. (and I just capped the new block's orginal right angle return hole) It works fine and I can always remove the new block and manifold cap if I ever want to return the tractor to orginal condition. Pete
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|