Farmall & IHC Tractors Discussion Board |
Re: Locking 300 tranny a pain in my fanny!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by IH-NEAL on December 24, 2001 at 13:31:25 from (216.165.155.80):
In Reply to: Locking 300 tranny a pain in my fanny! posted by Capt. Minx on December 24, 2001 at 09:00:48:
Dave is correct in saying it needs adjusting. If you go by the book adjusting it though, it will in all probability still not be quite right. The reason being the age and play that accumulates through wear on the shafts and parts. My first adjustment is always the main clutch. Get your free travel set there first. Now the short link that goes to your TA clutch is next. Leave the pin in the solid end by your main clutch shaft, adjust the sliding or elongated end of the short rod going to the TA shaft, so when you hold the upper part of the shaft ahead to front of tractor and push clutch to point where you just contact the main clutch that pin should just slide in. That should correct the problem. Hope that helps. Wish you all Happy Holidays.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|