Farmall & IHC Tractors Discussion Board |
Re: Re: Is it supposed to make noise?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dan on January 04, 2002 at 20:09:37 from (12.18.158.25):
In Reply to: Re: Is it supposed to make noise? posted by Steven@nd on January 04, 2002 at 17:34:19:
I also own a SMTA. Haven't ever noticed a wine in the pto unit though. If it quits when engaged perhaps it is an adjustemtnt in the "engage" band. Perhaps it is on the tight side so rubs a bit. As for oil out the vent, I have never had that problem. I would think for oil to get that high it would have to be overfull since the check plug is well down the side. If that is the case perhaps there is oil leaking into the PTO unit from the transmission. Have not had this apart but understand from the forum that it can happen if a seal is bad between the two. I have another problem with my PTO as it suddenly quit last year while running a baler. No noise or click bang etc. I'm told it is probably the seasonal disconnect coupler. Haven't had a chance to tear it down as I have been using the tractor with a snow blade.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|