Farmall & IHC Tractors Discussion Board |
Re: SC Rear Axle Seal Bearing Replacement ....Lon
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Skycarp on March 11, 2007 at 06:17:33 from (206.81.147.17):
In Reply to: Re: SC Rear Axle Seal Bearing Replacement ....Lon posted by gab on March 10, 2007 at 20:44:03:
Nope, I wouldn't try it. It is possible I guess, but I would never try it after seeing the size of the hole in the case. The opening at the PTO is less than 6 inches square. It would be very difficult to get to the bull gear through the PTO end unless you have a very long and very skinny arm and can work at it without seeing what you are doing. The bull gear is quite heavy and you will be lining up the splines and the two holes where the bull gear connects to the axle while doing all the work with one hand through the hole. If you drop your tools or the fasteners into the bottom of the case then you will most likely have to open the top anyway. How do you plan to take up the end play on the axle shaft?
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|