Farmall & IHC Tractors Discussion Board |
Re: Putting tire material on road bands
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Tom Windsor on April 14, 2007 at 11:51:13 from (75.117.78.163):
In Reply to: Putting tire material on road bands posted by tractor Hank on April 14, 2007 at 10:36:27:
Well, I did it on a Regular. I took an old H tire that I had. Cut the sidewalls off with a chain saw. Then cut the tire into two half moon pieces. Then split the half moons on a table saw. Then set the rip fence and made sure they were all the same width. And if you pay attention, it works out that you have tread atterns that go in the right direction and match. To fasten them to the rim, I used some liquid nails and lots and lots of C clamps to hold it in place. Then I drilled, I think, 1/4 inch holes for carrage bolts. Put carrage bolts in (2) side by side about ever foot around the rim. All in all, turned out to be a pretty neat job. I have posted pictures on here several months ago. For the fronts, thick Rubber that I had (1/2 inch thick) and glued and attached again with carriage bolts. If you cannot find the pictures, let me know and I will go take some more and send to you and see if this is what you want to do. TW TW
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|