Farmall & IHC Tractors Discussion Board |
Re: Super A pulling the brake drum
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on April 15, 2007 at 13:27:32 from (209.226.247.69):
In Reply to: Super A pulling the brake drum posted by Greg-N-CA on April 15, 2007 at 10:15:00:
Greg: I have the IH Blue Ribbon service manual for the 140 right in front of me and it says remove the RH final drive shaft as follows. a. Remove the drive shaft bearing cover. b. Remove the drive shaft from the final drive housing. c. remove the lock nut and setscrew from the brake drum. d. With a rubber mallet, tap the drive shaft out of the brake drum. I also notice on the LH, they suggest using a puller that hooks into opening in the drums. I guess the problem would be finding a puller long enough for right side. In both cases they are suggesting remove the shaft from the housing, then remove the drum. Once you have the shaft out, that will increase your options, bit of heat, hydraulic press, etc.
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|