Farmall & IHC Tractors Discussion Board |
Re: No spark
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by CNKS on May 16, 2007 at 19:12:29 from (204.249.178.32):
In Reply to: Re: No spark posted by the tractor vet on May 16, 2007 at 18:19:00:
Diagrams can be wrong. It shows the wire from the starter button to the S terminal on the solenoid, as you say. HOWEVER, it shows the wire from the opposite side of the starter button going thru the resistor to the + (non-points side) of the coil. The R terminal also attaches to the + side of the coil -- so this is wrong??As to the key switch, one terminal has the wire to the (-) ammeter terminal, which then goes from the (-) ammeter terminal to the Bat terminal on the regulator. The other ign switch terminal connects to the starter button. I have the thing wired according to the diagram, not saying this is correct. All wires are new, except those that did not come with the harness, even those are unused. There is no corrosion, anywhere.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|