Farmall & IHC Tractors Discussion Board |
Re: 424 loader/ hydraulic question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gary in Mozarks on June 18, 2007 at 18:18:50 from (66.43.47.108):
In Reply to: 424 loader/ hydraulic question posted by BlakeTN on June 18, 2007 at 17:57:24:
The knob on the lower left as you face forward is the flow control and it only determines how much pressure you have. 1/2 to full. The knob on the right, below the seat is the isolator/diverter valve and it determines where the pressure goes. To the three point or to the Aux. The diagram and manual says it should always be all the way closed or all the way open. From my experience with mine and from what I can see from the manual, it's working like its supposed to. If you send pressure to the aux the three point will drop. The only thing I can think of is to use short chains from the three point ball ends to the brackets on the side of the center link to keep the three point up. I use a set of them to stabalize my brush hog in the mow posistion. Hope this helps Gary
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|