Farmall & IHC Tractors Discussion Board |
Re: 10-20 FAN BELT
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill Smith on March 08, 2002 at 10:25:42 from (128.242.4.59):
In Reply to: 10-20 FAN BELT posted by Will@ont.ca on March 07, 2002 at 06:54:58:
I got a serpenetine belt on my F-20. I'm pretty sure the length and width would be simular for a 10-20. I had enough left of my old belt to measure it. I just simply took it to an autoparts store and started going through there belt rack and found one pretty easy. I put it on the F-20 with the serepentine part on the pulley so if you were to look at it the outside looks pretty much like the original. You would have to look at the underneath side to notice that it was a serepentine belt. If you wanted to run the flat side on the pulley just turn the belt inside out although that would be more noticeable that it is a serpenetine. It doesn't take much at all to turn that fan so either way will run the fan just fine. I found that this was easier than trying to make one yourself.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|