Farmall & IHC Tractors Discussion Board |
Re: 24 spokes on Regular
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ed-Ga. on March 27, 2002 at 07:34:12 from (209.214.73.3):
In Reply to: 24 spokes on Regular posted by Dave on March 26, 2002 at 16:04:07:
Hello Dave. Rubber tires were first available from I.H. in 1933. So Regulars came on steel and could be changed to any rubber tired wheel available for F20's. Wheels came in 24, 28, and 36 all round spoke. The earliest tend to use the 24 and 28 size. I can find no evidence that the 36" cast center rear wheels were available before 1937. You will also notice the bolster is extended a few inches down at the dust shield if the tractore came equipted with 36" rears rubber. This could compensates for the nose down attitude if not so equipted. You are right, they are all mixed up now and many people have different opinions. It's hard to argue with parts and photo archive books.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|