|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Repair of International 1486 Hydralic System
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by cb on April 25, 2002 at 13:09:54 from (207.54.105.157):
In Reply to: Re: Re: Repair of International 1486 Hydralic System posted by Martin Petrillose on April 25, 2002 at 06:53:21:
If he heard somekind of a lound pop. It sounds like the system was over pressurized somehow.
I would start with the relief valve and see if it stuck closed and then blew open,and is now dumping all of your system pressure. Hopefully it didn't damage the pump or other items. Also I'm guessing you don't have any pressure from your remotes.
I know this happened on our cousins tractor and he had to replace the relief cartridge and a remote blocks. He was lucky the pump was still ok.
Also have a good look in the filter housing and check for any debry or metal parts. If theres lose items in the system they eventualy end up in the filter. (i.e. springs ,clips etc.)
Good luck
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
