Farmall & IHC Tractors Discussion Board |
Re: Super C Hydraulics Overhaul: Need Encouragement.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Clyde on May 12, 2002 at 08:42:17 from (63.146.82.215):
In Reply to: Super C Hydraulics Overhaul: Need Encouragement. posted by RedTed/MO on May 11, 2002 at 17:43:57:
I put new seals and gaskets in my Super C TC unit last year. As long as the front head plate is off, the main pistons should come right out. If the head is still on, then suction would hold them in. Or if they are dry, the rubber rings might be siezed. You should take all the allen screws out so you can clean the passages. You can also get access to the backside of the actuators and valves you can't get out. You might be able to use a small screwdriver to help them out. That didn't work for me, though. I had a lot of trouble getting the them out. I tried things I won't even mention to get them out. What I ended up doing was gently driving a round brass punch the same size as the front recess in them so that it wedged tight. Then I was able to pull and twist on the brass punch to get them out. Be very careful. You might have trouble getting replacements if you score them. I used about a 1/2" round brass punch. After I had everything apart, I cleaned the block by putting it in a big rubber-maid tub and spraying all the passages in the block using mineral spirits with a pressure gun. Be sure to coat all parts with hyd oil as you put it back together.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|