Farmall & IHC Tractors Discussion Board |
Re: farmall h oil pressure gauge
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by ca on June 13, 2002 at 11:32:43 from (207.54.105.157):
In Reply to: farmall h oil pressure gauge posted by Bob on June 13, 2002 at 10:16:25:
If the gage is not leaking and is giving a proper reading it must be ok. Try another gage and see if it gives the same pressure readings. The gage pressure not going down untill you crack the feed line open. Tells me the pressure is not bleeding down in the engine block after you stop, Or did somebody but a check valve in the feed line "check". Dirt or forren material in the feed line mite act like a check valve, But it's not likely. This could cause a proplem if your running the engine and the oil pressure drops due to low oil level,plugged filter or oil pump quits etc, And the gage stays up you will think oil pressure is good. And then hear the engine knocking. Good luck and let us know
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|