Farmall & IHC Tractors Discussion Board |
Re: Attaching a sickle bar mower to a Super A?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on July 26, 2002 at 16:53:30 from (209.226.247.139):
In Reply to: Attaching a sickle bar mower to a Super A? posted by SAm in NS on July 26, 2002 at 13:44:05:
Super A had mowers that mounted on rear of tractor as well as mid mount mowers. Rear mount should be model no. 16 and centre mount should be model no. 22. There was a cub version and A, SA, 100, etc version. If numbers are no longer visable on mower, look for a mounting device that hooks to both sides of clutch housing and goes down and back at about 45 degrees. this holds a shaft that goes back and is belt driven by pto, V belt. Also look for a 8 inch diameter V pully that fits your pto. If you have all these items you have the centre mount mower. This mower will likely be components. Rear mount mower mounts where drawbar mounts and will be shaft driven to mower. Let me know which you have and will give you more info.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|