Farmall & IHC Tractors Discussion Board |
Re: Help finding the two bolts on a radiator for an M
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on July 30, 2002 at 18:47:24 from (166.72.245.168):
In Reply to: Help finding the two bolts on a radiator for an M posted by Bob G on July 30, 2002 at 17:30:16:
Never worked on one with a wide front. But...if there is a plate on the wide front that bolts up to the bottom of the front bolster, you may have to take it off to get to the radiator bolts. There are two holes, one each side of the bolster, in the bottom of the front bolster casting. You can stick a socket with extension up through there to get to the nuts on the radiator studs. With the tricyle front, there is nothing covering the holes in the bolster. However, on older Ms, the bolster did not have the holes and you have to work through from under the bolster center to reach the nuts, not an easy chore. Also, the nuts on the studs are castle nuts with a cotter pin to keep them from coming off, so first you have to get the cotter pin out. It it's still acoording to spec, there is a spring on the stud, then a washer and the castle nut with the cotter pin.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|