Farmall & IHC Tractors Discussion Board |
Re: M with 12v conversion-Problem finding right condensor!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Kendall on August 15, 2002 at 07:49:02 from (64.209.33.251):
In Reply to: M with 12v conversion-Problem finding right condensor! posted by Ryan Free on August 14, 2002 at 22:51:45:
I have seen the condenser go bad and stop you from getting spark. Replace it to be sure. Use any kind that will fit. Dose'nt matter. Just a reminder- you get spark when the points open. The first thing you need to do is make sure you're getting spark out of the coil. Hold the high voltage wire coming out of the top of the coil near a good ground and make the points open and close, either manually or by turning the starter. You can do this even if the distributor cap is removed. Watch the points to see if they are opening and closing. (Wont be much) If you got spark, then the problem is in the distributor. May need new rotor & cap. It could have carbon trail built up inside diverting the spark to ground instead of out the post, or you got things mixed up inside and rotor is not lined up with post when it does spark. Also make sure the negative screw on the coil is going to the distributor. Hope this gets you sparking!
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|