Farmall & IHC Tractors Discussion Board |
Re: H rocker arm Clarification I hope
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Don LC on September 15, 2002 at 09:20:48 from (24.166.248.35):
In Reply to: H rocker arm Clarification I hope posted by 230,H,M on September 14, 2002 at 06:25:16:
When you look at all your "rocker arm too valve stem" contact,you are looking at differnt stages of valve opening and closing....the cam shaft is raising and lowering the rocker arms according to fireing order.....You are comparing apples and ornges.....check each set ,when the valves are closed ....turn engine until you the timming mark lines up with pully mark....you will find that on at least "one" cyl, you can turn both push rods with your fingers.....both valves are closed ...Look at those two rocker/valve stems....keep turning engine untill mark comes up again ,look for a set of loose push rods and check them.....keep doing this until you have looked at all 4 cyl.......that is what you want to compare...By the way you can follow the fireing order as you turn and align the timming marks....This is also how to adjust the valve clearnce,when both valves are closed.....Sorry about the long post....
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|