Farmall & IHC Tractors Discussion Board |
Re: Friend's 300 utility
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by big fred on November 10, 2002 at 20:46:20 from (65.219.138.190):
In Reply to: Friend's 300 utility posted by Puller504 on November 10, 2002 at 19:27:41:
I'm guessing he has at least two hydraulic control valves on it. If so, and if he has valves mounted on the forward ports (near the forward end of reservoir), he needs to feed the forward valve(s) with pressure from the rear set of valves and block off the pressure port at the reservoir. There is a plug specifically for this, it's a little non-threaded plug with an o-ring. IH part number is 364 880 R1. Since the P/S was added on, the fellow that did it probably didn't know about this and after he tore his hair out, he gave up and sold it. He will also need to make sure he has the flow control (priority) valve in his safety/regulator valve, too, to make it all work right. The IH part number for that valve is 364 841 R95. If he has a parts manual, have him look at pages 282 thru 287, the illustration on P. 282 shows the hookup. In addition, to feed the pressure to the front valves, he's going to have to modify his control valve end plates to feed pressure from the back to the front valves and supply a section of hose. That isn't shown in any of the illustrations, can't figure out why.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|