Farmall & IHC Tractors Discussion Board |
Re: FARMALL C MOUNTING STEP
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ernie Bob on December 11, 2002 at 20:01:10 from (198.81.27.16):
In Reply to: FARMALL C MOUNTING STEP posted by HANK on December 10, 2002 at 07:00:23:
Hank, I made a step for my Super C by taking a piece of channel iron, drilling two holes in it the width of the axle housing diameter and bolting another short piece of channel iron with matching holes drilled in it to clamp on the axle housing. I ran the longer piece to the front about 18" then welded a 6" piece of angle iron across for a step, worked real well. On my 200 Farmall with th fast hitch I bolted a 3 foot piece of channel iron across the front of the hitsh that splits the difference between the ground and the axle housing. Send me an e-mail if your interested I could probably put one together for you for minimal $ Good Luck! Ernie Bob
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|