Farmall & IHC Tractors Discussion Board |
Re: 706 Range Cover
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by the tractor vet on December 14, 2002 at 18:56:58 from (216.196.13.71):
In Reply to: 706 Range Cover posted by Duben on December 14, 2002 at 14:54:40:
If it has the old stile park lock that is the over center stile then no not realy but if it has been up dated then you must block it up, i use a half inch nut stood on end . It also helps to pull the cover off the side where rev. is as you will be bringing the reverse shift rod out with the cover and if it is like most 06searies the woodworthe key will fall out and the reverse shift fork will turn you will lose about a gal. of hy tran when this cover is pulled and it also helps if you have one extra pair of hands , place the range shifter in nuetral and when you go back togeather a flash lite helps to see under the cover as you go back down. This is the time to fix that sloopy rev. and rebush the top cover .
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|