Farmall & IHC Tractors Discussion Board |
Re: Upper Bolster Revisited
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on January 12, 2003 at 19:16:03 from (24.169.120.229):
In Reply to: Upper Bolster Revisited posted by Kelly C on January 12, 2003 at 17:28:57:
Kelly - I ran into exactly the same problem with my Super H! Apparently someone had the front end apart before me, and when they put it back together they left out a spacer above the pivot shaft thrust bearing. My solution was to have a machinist buddy turn several spacers of varying thickness. Then used trial and error to find the correct spacer that would center the sector gear on the worm. If I recall 3/8" thick was right. Check in the Parts 'n Pieces Gallery for a photo of the bearing and spacer (I can't seem to get a photo to post here tonite...). Here is the URL: http://www.tractorshed.com/cgi-bin/gallery/pieces_pic.cgi?pic=http;//www.tractorshed.com/gallery/pieces/v160.jpg&firstrec=1&lastrec=15&Parameter=&mode=All&what=pieces Also clever your method to remove the old upper pivot shaft bushing! On my SH I wound up driving a chisel down thru the bushing shell from above to cut slot in it, then collapsing it with a big screwdriver to get it out. ...Bob M
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|