Farmall & IHC Tractors Discussion Board |
Re: No.45 and No.46 balers ?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay again on January 13, 2003 at 05:07:19 from (209.226.247.6):
In Reply to: No.45 and No.46 balers ? posted by Wardner on January 12, 2003 at 15:11:08:
Wardner: How I happen to know of the wheel weight type of weight added to baler flywheel, is my dad purchased in 1953 a Mc Cormick 45 baler with the Wiscinsin air cooled engine. At the time he felt without Live pto that was best move. In 1955 he bought a new 300 with IPTO and a PTO shaft for the 45 baler. He removed the baler engine and attempted to install pto shaft. That wheel type weight bolts to flywheel where pto slip clutch and pto shaft bolt on and cant both be on there at same time. The added flywheel weight was designed to reduce plunger shock on Wisconsin engine. It would be reasonable to believe the weight is also used on the Electrall setup.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|