Farmall & IHC Tractors Discussion Board |
Re: 300U Steering
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob Jr from MN on February 02, 2003 at 06:38:40 from (209.131.251.72):
In Reply to: 300U Steering posted by Bob Jr from MN on January 27, 2003 at 16:35:08:
Took apart the spindles on both side and found that the spindle on the left side was not OEM in fact someone had used copper or brass sheeting to make a shim/bushing for the outer bearing. Had a steel bushing made and pressed onto the spindle. Repacked the bearings on both sides and put it together. Went to back it out of the barn and test drive it and the what i thought was the good OEM spindle on the side that went out of round broke completely off just behind the inner bearing seal. Examined it and there appeared to be an old crack on the bottom of the spindle and a newer one on the top which is what caused the wobble. I should have taken that inner seal off and examined the spindle but the seal looked new and I have never seen that kind of a break before. I guess experience is the best teacher and thank the lord no one was hurt when the wheel came off .
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|